Basic Settings and Service Procedures
HDS Middle Range / HDS Premium Range
Page 100 / 127
Service Manual 04.2008
3.7
Removing the hose reel
3.7.2 Replacing the rotating union seal
– Remove bolt-on half-shell and high-pressure
hose (see Chapter 3.7.1).
– Remove countersunk screw (1).
– Turn hose reel (2) until the half-shell points
upwards and remove another two countersunk
screws (3).
– Remove four screws (4) (2 x long and 2 x
short) on the front bearing block (5).
1
2
2
Hose reel, concealed screw
Hose reel, concealed screws
Bearing block, hose reel
3
4
5
1 Countersunk screw
2 Half-shell, hose reel
3 Countersunk screws (2x)
4 Retaining screws, bearing block
5 Bearing block, hose reel