![background image](http://html2.mh-extra.com/html/karcher/hds-e-3-3-25-4m-ec/hds-e-3-3-25-4m-ec_user-manual_4211114013.webp)
– 7
DANGER
Danger of scalding by hot water. After oper-
ation with hot water, the appliance must be
operated with an open gun with cold water
for at least five minutes to cool it off.
Set the appliance switch to "0/OFF“.
Shut off water supply.
Open the hand spray gun.
Turn on pump shortly (appr. 5 seconds)
with device switch.
Pull main plug out of socket with dry
hands only.
Remove water connection.
Activate hand spray gun until device is
pressure less.
Lock the trigger gun.
Lock in the steel pipe into the holder of
the appliance hood.
Roll up high pressure hose and electri-
cal conduit and hang them into the re-
spective holders.
Note:
Do not twist high pressure hose and
electrical conduit.
ATTENTION
Frost will destroy the not completely water
drained device.
Store in a frost free area.
If it is not possible to store frost free, shut
down device.
For longer work breaks or if a frost free stor-
age is not possible:
Drain water.
Flush device with anti-freeze agent.
Empty detergent tank.
Screw off water supply hose and high
pressure hose.
Unscrew the drain screw of the boiler
on the bottom of the boiler and empty
the boiler.
Operate device for max. 1 minute until
the pump and conduits are empty.
Note:
Observe handling instructions of the
anti-freeze agent manufacturer.
Fill commercial grade anti-freeze into
the boiler.
Switch on appliance (without heater)
until the appliance has been completely
rinsed.
A certain corrosion protection is achieved
with this as well.
몇
CAUTION
Risk of injury and damage! Note the weight
of the appliance in case of storage.
Figure 6
ATTENTION
Risk of damage! When loading the appli-
ance with a forklift, observe the illustration.
몇
CAUTION
Risk of injury and damage! Observe the
weight of the appliance when you transport
it.
When transporting in vehicles, secure
the appliance according to the guide-
lines from slipping and tipping over.
DANGER
Risk of injury by inadvertent startup of ap-
pliance and electrical shock.
First pull out the plug from the mains before
carrying out any tasks on the machine.
Set the appliance switch to "0/OFF“.
Shut off water supply.
Open the hand spray gun.
Turn on pump shortly (appr. 5 seconds)
with device switch.
Pull main plug out of socket with dry
hands only.
Remove water connection.
Activate hand spray gun until device is
pressure less.
Lock the trigger gun.
Turn off the appliance
Storing the Appliance
Frost protection
Shutdown
Dump water
Flush device with anti-freeze agent
Storage
Transport
Maintenance and care
13
EN
Summary of Contents for HDS-E 3.3/25-4M Ec
