Kärcher HDS 655 M Eco, Instructions Manual

Page: 24 / 36

24
English
– The water shortage safeguard prevents
the burner to be turned on when there is
water shortage.
– A sieve prevents the contamination of
the safeguard and must be cleaned reg-
ulary.
– The motor protection switch interrupts
the electric circuit if the motor is over-
loaded.
– The temperature stop switches off the
machine when the waste gases have
reached very high temperatures.
n
Danger
Risk of injury! Device, tubes, high pressure
hose and connections must be in faultless
condition. Otherwise, the appliance must
not be used.
!
Lock parking brake.
Figure 3
n
Warning
In case of lacteous oil inform Kärcher cus-
tomer service immediately
! If oil level approaches the MIN marking,
fill oil until MAX marking
! Close oil refill nozzle
Oil grade: see Technical Data
Note
A sample bundle of liquid softener is includ-
ed
Bild 1 - Pos. 15
! Refill liquid softener.
The liquid softener prevents the calcifica-
tion of the heating spiral while operating
with calciferous tap water It is dosed into
the supply drop by drop
The metering is set to medium water rigidity
by the manufacturer
!
For other water rigidity call for Kärcher
customer service and have it adapted to
local facts
Figure 1 - Pos. 12
n
Warning
Never operate device with empty fuel tank
The fuel pump will otherwise be destroyed.
m
Danger
Risk of explosion! Only refill diesel oil or
light fuel oil. Unsuitable fuels, e.g. petrol,
are not to be used.
! Refill fuel.
! Close tank lock.
! Wipe off spilled fuel.
m
Danger
Risk of injury!
– Use Kärcher products only.
– Under no circumstances fill solvents
(petrol, aceton, diluting agent etc.)
– Avoid eye and skin contact.
– Observe safety and handling instruc-
tions by the detergent manufacturer.
Kärcher offers an individual cleaning
and care appliances program.
Your dealer will consult you gladly.
Bild 1 - Pos. 14
! Refill detergent.
! Connect ray tube with hand spray gun
! Insert high pressure nozzle into cover-
ing nut
! Install covering nut and tighten firmly
Figure 1 - Pos. 19
!
Connect the high pressure host to the
high pressure connection point of the
machine.
Water shortage safeguard
Motor protection switch
Temperature stop for exhaust gases
Start up
Check oil level
Refill liquid softener
Refill fuel
Refill detergent
Install the hand-spray gun (appli-
ances without hose drum)