Kärcher HDS 655 M Eco, Operating Instructions Manual

Page: 13 / 25

English Operating Instructions
30
Recommended nozzles, available as
accessories
— For stubborn dirt
0°full jet nozzle
— For sensitive surfaces and superficial
dirt
40°-fan jet nozzle
—
For thick-film, stubborn dirt
Dirt blaster
— Nozzle with adjustable spray angle,
adaptable to many cleaning tasks
Variable-angle nozzle
Cleaning
! Set pressure/temperature and detergent
concentration appropriately to surface to
be cleaned
Always start by directing high-pressure jet
from a good distance at object to be
cleaned to avoid damage caused by
excessive pressure.
Recommended cleaning method
Loosen up dirt:
!
Spray on cleaning agent sparingly and
allow to react for 1...5 min (do not allow
to dry on).
Remove dirt:
! Spray off loosened-up dirt with high-
pressure jet.
Operation with cold water
Removal of slight contamination and rinsing
e.g: gardening implements, patio, tools, etc.
! Set operating pressure as required
! Set temperature control (item 24) to "0"
Operation with hot water
Warning!
Danger of scalding
! Set the remperature regulator (item 24)
to the required temperature
We recommend the following cleaning
temperatures
—
Slight contamination 30-50°C
— Protein soiling, e.g. in foodstuffs industry
max. 60°C
—
Motor vehicle cleaning, machine
cleaning 60-90°C
Operation with steam
Danger: Steam!
At operating temperatures exceeding 98°C
it is not permissible for the operating
pressure to exceed 32 bar
(HDS 1195: 28 bar).
Therefore the following steps must be
taken without fail:
!
Replace high-pressure nozzle by steam
nozzle
Manufacture no.:
4.766-023
HDS Super M Eco
HDS Super MX Eco
HDS 655 M Eco
HDS 695 M Eco
HDS 695 MX Eco
HDS 895 M Eco
HDS 895 MX Eco
4.766-024 HDS 1195 S Eco
HDS 1195 SX Eco