– 7
Pull main plug out of socket with dry
hands only.
Remove water connection.
Activate hand spray gun until device is
pressure less.
Secure the trigger gun. To do so, push
the safety catch towards the front.
Insert the hand-spray gun in the holder.
Appliance without hose drum:
Wind up the high-pressure hose and
hang it over the hose storage.
Device with hose drum:
Wind up the high-pressure hose on the
hose drum. Push in the handle of the
crank to block the hose drum.
Wind the connection cable around the
cable holder.
Fasten the plug with the mounted clip.
ATTENTION
Risk of damage! Frost will destroy the appli-
ance if the water has not been completely
drained.
Store in a frost free area.
If the device is connected to a chimney, the
following must be observed:
ATTENTION
Threat of damage by penetrating cold air
through the chimney.
Disconnect device from chimney when
outside temperature drops below 0 °C.
If it is not possible to store frost free, shut
down device.
For longer work breaks or if a frost free stor-
age is not possible:
Drain water.
Flush device with anti-freeze agent.
Screw off water supply hose and high
pressure hose.
Illustration
Lay the appliance on its rear.
Operate the appliance for a max. of 1
minute with cold water until the pump
and conduits are empty.
Note:
Observe handling instructions of the
anti-freeze agent manufacturer.
Fill commercial grade anti-freeze into
the water connection.
Switch on appliance (without heater) till
the appliance has been completely
rinsed.
A certain corrosion protection is achieved
with this as well.
몇
CAUTION
Risk of personal injury or damage! Consid-
er the weight of the appliance when storing
it.
DANGER
Risk of injury! Risk of tipping with high in-
clines, if the inclination is too large to the
side and with unstable surfaces.
–
The appliance should only be used on
gradients of max. 2%.
–
Only use the machine on sound surfac-
es.
ATTENTION
Protect the trigger from damage during
transport.
몇
CAUTION
Risk of personal injury or damage! Mind the
weight of the appliance during transport.
Lay the appliance on its rear prior to
transporting it and drain the residual
water.
Pull the device behind you at the carry-
ing handle for transporting it over longer
distances
To carry, hold the appliance by the han-
dles and the pushing handle.
When transporting in vehicles, secure
the appliance according to the guide-
lines from slipping and tipping over.
Storing the Appliance
Frost protection
Shutdown
Dump water
Flush device with anti-freeze agent
Storage
Transport
10
EN
