![background image](http://html1.mh-extra.com/html/karcher/hds-3-5-30-ea-cage/hds-3-5-30-ea-cage_operators-manual_654076014.webp)
HDS 505, 508, 509, 510 • 9.800-078.0 - N
PRESSURE
W
ASHER
T
roub
leshooting Guide
14
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE
SOLUTION
LOW WATER
TEMPERATURE
Improper fuel or water in fuel
Drain fuel tank and replace with proper fuel.
Low fuel pressure
Increase fuel pressure.
Weak fuel pump
Check fuel pump temperature. Replace
pump if needed.
Fuel fi lter partially clogged
Replace as needed.
Soot build up on coils
Clean coils with soot remover.
Lime build up on coils
Clean inside of coils using coil cleaner.
Improper burner nozzle
See Burner Specifi cations.
WATER
TEMPERATURE
TOO HOT
Incoming water to machine
warm or hot
Lower incoming water temperature.
Fuel pump pressure too high
Lower fuel pressure.
Fuel pump defective
Replace fuel pump.
Detergent line sucking air
Tighten all clamps. Check detergent line for holes.
Defective high limit switch
(thermostat)
Replace.
Incorrect fuel nozzle size
See Burner Specifi cations.
Insuffi cient water supplied
Check GPM to machine.
Restricted water fl ow
Check nozzle for obstruction, proper size.
MACHINE
SMOKES
WHILE
BURNER UNIT
IS RUNNING
OR
UNIT SMOKES
AT COLD-START
ONLY WHEN
BURNER
IS OFF
Improper air adjustment
Readjust air bands on burner assembly
Fuel pressure is low <140 psi for
burner
Adjust fuel pump pressure to specifi cations
Burner nozzle is plugged or dirty
Replace nozzle. Check parts breakdown
for nozzle size
Burner nozzle spray pattern is
faulty
Replace nozzle. Check parts breakdown
for nozzle size
Heavy accumulation of soot on
coils and burner assembly
Remove coils and burner assembly,
clean thoroughly Call local dealer
Misaligned electrode setting
Realign electrodes to specifi cations
Obstruction in smoke stack
Check for insulation blockage or other
foreign objects
Low engine RPM
Increase RPM to correct specs. See serial plate
Fuel Pressure is too high for
clean burn (fuel PSI above 140
and below 200) and smokes
when burner is off
Reduce fuel pressure PSI/Increase air band set for
cleaner without max water heat loss