![background image](http://html1.mh-extra.com/html/karcher/hds-10-20-m/hds-10-20-m_service-manual_654050012.webp)
12
English
5.906-432.0 Rev. 00 (06/15)
Note
Tag is an electronic component on the new square soften-
er bottle. The tag is located behind the bottle label. The tag
can be read and written on electronically (also see 6.10.3
"Functionality RFID").
6
1 x blinking
Exhaust thermostat open. Check/replace emission temperature/
thermostat. Perform maintenance on the burner.
2 x blinking
Flame sensor reports burner fault. Clean and check the burner, ig-
nition and fuel system.
3 x blinking
RFID write-read electronics is defective - replace.
4 x blinking
Fault water temperature sensor. Cable break (temperature below
-5°C, although the burner is on) or short circuit (temperature
above 220°C for a longer period of time). The device switches off
after approx. 10 seconds.
7
glow
Service tasks due:
–
400h burner
–
600h pump
–
80000 gun switching operations
8
glow
Softener level switch detects empty condition or the units on the
tag of the softener bottle have been consumed.
1 x blinking
5 hours of after-running time elapsed, burner is locked. Insert new
softener bottle.
9
glow
Detergent tank 2 is empty. Refill detergent (only HDS 12/18)
LED no.
Symbol
Activity
Meaning / measure
Summary of Contents for HDS 10/20 M
