English
5.906-441.0 Rev. 01 (06/10)
27
Î
Insert the new washers into the screw insert.
Î
Insert and press in the new seal package into the cylinder head
using the installation sleeve and the driver. Observe the se-
quence.
Î
Tighten the stopping bushings using the special tool 5.511-
001.0 to 50 Nm.
Î
Assemble the cylinder head in the reverse sequence.
Flange the crankshaft casing off the electric motor
Î
Turn out the oil drain screw at the bottom of the pump casing
and collect the oil in a suitable container.
4.9.5 Replace the oil rings