background image

English

4

IMPORTANT SAFETY 
INSTRUCTIONS

WARNING!

When using this product basic precautions 
should always be followed, including the 
following:

„

Read all the instructions before using the 
product.

„

To reduce the risk of injury, close 
supervision is necessary when a product is 
used near children.

„

Know how to stop the product and bleed 
pressures quickly. Be thoroughly familiar 
with the controls.

„

Stay alert – watch what you are doing.

„

Do not operate the product when fatigued 
or under the influence of alcohol or drugs.

„

Keep operating area clear of all persons.

„

Do not overreach or stand on unstable 
support. Keep good footing and balance at 
all times.

„

Follow the maintenance instructions 
specified in the manual.

„

This Product Is Provided With A Ground 
Fault Circuit Interrupter Built Into The 
Power Cord Plug. If Replacement Of The 
Plug Or Cord Is Needed, Use Only 
Identical Replacement Parts.

„

Risk of Injection or Injury – Do Not Direct 
Discharge Stream At Persons.

„

High pressure jets can be dangerous if 
misused. The jet must not be directed at 
persons, animals, electrical devices, or the 
machine itself.

„

Wear safety goggles.

„

Do not use acids and solvents in this 
product. These products can cause 
physical injuries to the operator and 
irreversible damage to the machine.

„

To reduce the risk of electrocution, keep all 
connections dry and off the ground. Do not 
touch plug with wet hands.

„

The Trigger Gun Safety Lock PREVENTS 
the trigger from accidentally being 
engaged. This safety feature DOES NOT 
lock trigger in the ON position.

„

Do not use extension cord with this unit.

GROUNDING INSTRUCTIONS

This product must be grounded. If it should 
malfunction or breakdown, grounding 
provides a path of least resistance for electric 
current to reduce the risk of electric shock. 
This product is equipped with a cord having 
an equipment-grounding conductor and a 
grounding plug. The plug must be plugged 
into an appropriate outlet that is properly 
installed and grounded in accordance with all 
local codes and ordinances.

DANGER

Improper connection of the equipment-
grounding conductor can result in a risk of 
electrocution. Check with a qualified 
electrician or service personnel if you are in 
doubt as to whether the outlet is properly 
grounded. Do not modify the plug provided 
with the product - if it will not fit the outlet, have 
a proper outlet installed by a qualified 
electrician. Do not use any type of adapter 
with this product.

GROUND FAULT CIRCUIT 
INTERRUPTER PROTECTION

This product is supplied with a Ground Fault 
Circuit Interrupter (GFCI) built into the power 
cord plug. This device provides additional 
protection from the risk of electric shock. If 
power is interrupted in the line, the GFCI will 
automatically re-close the circuit to the load 
after power is restored. Depending on the 
GFCI model, it may be necessary to manually 
operate the reset button to restore power to 
the GFCI load circuit. If replacement of the 
plug or cord is needed use identical 
replacement parts.

Summary of Contents for HD 3.0/20-4 M Ea













Reviews: