English
9
Detergents can only be applied with
the black detergent nozzle.
STEP 1:
Install the black detergent nozzle for
detergent application (will work at
low pressure only).
STEP 2:
Fill a container with Kärcher deter-
gent. Place the filter end of detergent
suction tube into the container.
STEP 3:
With the engine running, pull trigger
to operate unit.
Liquid detergent is drawn into the
unit and mixed with water.
Apply detergent to work area.
Do not allow detergent to dry on sur-
face.
STEP 4:
Always
draw fresh water through
the detergent suction tube when the
cleaning job is done, to rinse/flush
any remaining detergents from the
injection system.
For best results see Cleaning Tips
for specific information on how to
clean different surfaces.
CAUTION
This unit has been designed for use with
cleaning detergents recommended by
the manufacturer. The use of other
cleaning detergents may affect the op-
eration of the machine and void the war-
ranty.
Always Use Kärcher Detergent for
Best Results
Kärcher Commercial detergents have been
specifically formulated to work with your
pressure washer to help you clean more
quickly and thoroughly. Each one of our
proprietary blends comes with our
exclusive
Pump and Coil Protection Formula
designed specifically for use though
high-pressure cleaning equipment!
For a complete listing of detergents please
visit
www.karchercommercial.com
or ask your local dealer.
CAUTION
Never use
:
– Bleach, Chlorine products and other
corrosive chemicals
– Liquids containing solvents (i.e.,
paint thinners, gasoline, oils)
– Tri-sodium phosphate products
– Ammonia products
– Acid-based products
These chemicals will harm the unit and
will damage the surface being cleaned.
Use of these items will void the war-
ranty.
WORKING WITH DETERGENTS
Detergents
