background image

English

 5

CAUTION

Risk of Fire – Do not add fuel when 
the product is operating.

„

Do not operate if fuel has been 
spilled. Instead, move the machine 
to a different location and avoid cre-
ating sparks.

„

The machine has hot surfaces which 
can cause burns. Operate the unit in 
a safe environment and away from 
children.

„

Do not touch hot surfaces or allow 
accessories to contact hot surfaces.

„

Do not allow the high pressure hose 
to come into contact with the muffler 
guard.

„

Do not leave the machine running 
unattended.

„

Avoid tipping the machine on its 
side.

SAVE THESE INSTRUCTIONS

CAUTION

When connecting the water inlet to 
the water supply mains, local regula-
tions of your water company must be 
observed. In some areas the unit 
must not be connected directly to the 
public drinking water supply. This is 
to ensure that there is no feedback of 
chemicals into the water supply. Di-
rect connection via a receiver tank or 
backflow preventer, for example, is 
permitted.
Dirt in the feed water will damage the 
unit. To avoid this risk, we recom-
mend fitting a water filter.

„

Garden hose must be at least 5/8 
inch in diameter.

„

Flow rate of water supply must not 
fall below 2.8 GPM (gallons per 
minute).

„

Flow rate can be determined by run-
ning the water for one minute into an 
empty 5-gallon container.

„

The water supply temperature must 
not exceed 104°F/40°C.

„

Never use the pressure washer to 
draw in water contaminated with sol-
vents, e.g. paint thinners, gasoline, 
oil, etc.

„

Always prevent debris from being 
drawn into the unit by using a clean 
water source. Use additional water 
filter.

„

Do not operate pressure washer 
without the water turned on.

WATER SUPPLY 

(Cold Water Only)

Summary of Contents for HD 2.5/30 CH
















Reviews: