Kärcher HD 2.5/27 Pb-1.575-151.0 Operator'S Manual Download

Page: 6 / 14

9.800-083.0 • REV. 11/06

PRESSURE

ASHER

OPERA

TOR’S MANU

STeP 1:

Attach the handle to the

frame of the pressure washer.

Note

It may be necessary to move the
handle supports from side to side
in order to align the handle so it will
slide over the frame supports.

STeP 2:

Insert the carriage bolt

through the holes from the outside
of the unit and attach a nut from
the inside of the machine. Tighten
nuts.

STeP 3:

Attach the spray gun/hose

storage handle, and bracket to
handle. Tighten nuts.

STeP 4:

Attach the high pressure

hose to the spray gun using teflon
tape on hose threads.

STeP 6:

Release the coupler col-

lar  and  push  the  nozzle  and  the
collar until the collar clicks or locks.
Pull  the  nozzle  to  make  sure  it  is
secure.

STeP 7:

Connect high pressure

hose to pump discharge fitting.
Push coupler collar forward until
secure.

STeP 5:

Pull the spring-loaded

collar of the wand coupler back
to insert your choice of pressure
nozzle.

STeP 8:

Connect garden hose to a

clean cold water source and open
supply valve completely. NEVER
use hot water.

ASSeMblY INSTRUCTIoNS

STeP 9:

Connect the garden hose to pump water inlet.

Inspect inlet screen.

CAUTION: Do not run the pump

without water or pump damage will result.

Alignment

Holes

Handle

Frame

Assy.

Carriage

bolt

Nut

Studs

Nut

Hose/Spray gun

Storage bracket

Safety

latch

Spray

gun

High Pressure

Hose

Wand

Coupler

Pressure

Nozzle

Pressure

Nozzle

Wand

Coupler

Wand

Collar

Pump

discharge

Fitting

High Pressure Hose

Cold

Water

Source

garden

Hose

Pump

Water Inlet

garden

Hose

Coupler

Collar

bolts

Washer

Inlet Screen

Summary of Contents for HD 2.5/27 Pb-1.575-151.0















Search results

Summary of Contents for HD 2.5/27 Pb-1.575-151.0

Reviews:

Related manuals for HD 2.5/27 Pb-1.575-151.0

Brands by name

Popular brands

Kärcher HD 2.5/27 Pb-1.575-151.0, Operator'S Manual

Search results

Summary of Contents for HD 2.5/27 Pb-1.575-151.0

Reviews:

Related manuals for HD 2.5/27 Pb-1.575-151.0

Brands by name

Popular brands