English
Operating Instructions HD 994... / HD 1094... / HD 1294...
19
Transporting the cleaner
n
To transport the cleaner over relatively long
stretches, take hold of it by the handle and
pull it along behind you.
n
Empty the detergent reservoir before
transporting it horizontally.
Storing the cleaner
n
Place the handgun in the support.
n
Reel in the high-pressure hose and hang it
over the hose rest.
n
Wind the high-pressure hose on to the
hose reel. Push in the crank handle to lock
the hose drum.
n
Coil the connecting cable round the cable/
hose rest.
Frost protection
Caution!
Water which has frozen in the cleaner
can destroy parts of it. At best store the
cleaner in a heated room during the winter or
empty it or rinse it thoroughly with antifreeze.
n
Empty the cleaner
– Unscrew the inlet hose and high-
pressure hose or handgun from the unit.
– Leave the cleaner running until the
pump and lines have emptied (max.
1 minute).
n
Putting in antifreeze
For longer intervals between operations,
pumping antifreeze through the cleaner is
to be recommended. By this means also
you obtain a sure protection against
corrosion.
Care and maintenance
Danger!
Before undertaking any care or
maintenance work on the cleaner, pull out the
power plug.
Caution!
When changing the oil, dispose of any
waste oil only at authorised collection points.
Safety inspection/maintenance
contract
You can arrange with your dealer to have a
regular safety inspection carried out or to
have a maintenance contract. Please seek
advice on this.
Each time before operating the
cleaner
n
Check connecting cable for damage (risk of
getting an electric shock), have a damaged
connecting cable replaced without delay by
authorised Customer Service personnel or
an electrician.
n
Check high-pressure hose for damage
(danger of explosion), replace a damaged
high-pressure hose without delay.
n
Check cleaner (pump) for any leaks.
Three drops per minute are allowable and
can appear on the underside of the
cleaner. Seek the help of Customer
Service if leaks are more serious.
Every week
n
Check the oil level in the oil reservoir. if the
oil is milky (water in oil), seek the help of
Customer Service immediately.
n
Clean strainer at the water connection.
n
Clean the filter on the detergent suction
hose.
n
Oil the shaft on both sides of the hose reel
in the bearing block (only HD…SX…).
!
