Kärcher HD 10/25 S VEX, Operating Instructions Manual

Page: 9 / 16

Operating Instructions HD 10/25 S/SX Plus, 13/18 S/SX Plus English
18
Selecting the type of spray
The handgun must be closed.
„
Rotate the housing of the nozzle until the
desired symbol corresponds with the mark-
ing.
„
Select pencil jet or fan jet by contactless
changeover:
rotate the spray lance, which is pointing
down at an angle of approx. 45°, to the left
or right.
Explanation of the symbols
High-pressure pencil jet (0°),
for particularly stubborn accumu-
lation of grime.
High-pressure fan jet (25°), for
dirt accumulation over a large
surface.
Low-pressure fan jet (CHEM)
for operation with detergent or for
cleaning at low pressure.
Operating with detergent
Caution!
Unsuitable detergents can harm the
cleaner and the object which is to be cleaned.
Use only detergents which are released by
Kärcher. Proportions of detergent to be used
and accompanying instructions should be not-
ed carefully. Use detergents sparingly out of
consideration for the environment.
Kärcher cleaning agents guarantee trouble-
free operation. Please seek advice or ask for
our catalogue of information sheets on clean-
ing agents.
„
Fill detergent reservoir.
„
Set nozzle to .
„
Set the detergent metering valve to the
desired concentration.
Concentration of detergent when flow at
maximun:
Recommended cleaning methods
„
Spray detergent with low pressure jet spar-
ingly over the dry surface to be cleaned and
let it take effect but not dry out.
„
Spray off (rinse off) the loosened dirt using
the high-pressure spray.
„
When you have finished the operation, set
detergent metering valve to "0" and switch
the unit on for about 1 minute and rinse it
clear of detergent.
Position of metering
valve 1 3 5 7
0.5
%
2.5
%
5.0
%
7.0
%