Kärcher HD 10/16-4 Cage Ex, Manual

Page: 18 / 328

– 4
 Connect high pressure hose and spray
pipe to the hand spray gun.
 Screw the exchange nozzle onto the
spray pipe.
1 Round jet nozzle
2 Lock screw
3 Power nozzle
4 Union joint

Open the safety screw.

Unscrew the union nuts.
 Mount the power nozzle (with two flat
connection) and the round jet nozzle on
the exchange nozzle. Tighten the cov-
ering nuts fingertight.
 Slightly tighten the safety screw.
 Connect the high pressure hose to the
high pressure connection point of the
machine.
– For connection values refer to technical
specifications
– The electrical connections must be
done by an electrician according to IEC
60364-1.
– As is standard, the machine is equipped
with an EEx plug. If the existing socket
does not match this plug, it must be ad-
justed accordingly by a technician.
몇 WARNING
The highest allowed net impedance at the
electrical connection point (refer to techni-
cal data) is not to be exceeded.
In case of any uncertainty regarding the
present net impedance at your connection
point, please contact your local power sup-
ply company.

DANGER
– Check whether the voltage indicated on
the type plate corresponds to the volt-
age of the socket.
– Unsuitable electrical extension cables
can be hazardous. Only use electrical
extension cables outdoors which have
been approved and labelled for this pur-
pose and have an adequate cable
cross-section.
1 - 10 m: 2.5 mm
2
10 - 30 m: 4 mm
2
몇
WARNING
Observe regulations of water supplier.
For connection values, see type plate/tech-
nical data.
 Use a conductive (electrostatically)
hose (resistance R < 10
6
Ohm, not in-
cluded). Minimum diameter, 3/4 inch.
 Connect the hose to the water connec-
tion of the appliance.
 Connect the hose to the water tap.
ATTENTION
Never operate the high pressure cleaner
when the tap is closed because dry running
can damage the high pressure pump.
 DANGER
Risk of injury!
– Use Kärcher products only.
– Under no circumstances fill solvents
(petrol, aceton, diluting agent etc.)
– Avoid eye and skin contact.
– Observe safety and handling instruc-
tions by the detergent manufacturer.
– Follow the safety instructions for using
detergents.
– For considerate treatment of the envi-
ronment use detergent economically.
– The detergent must be suitable for the
surface to be cleaned.
Recommended detergents:
– RM 31 ASF
– RM 55 ASF
– RM 81 ASF
Attaching the Accessories
Power supply
Water connection
Detergent
18 EN