6
English
CAUTION
When connecting to water sup-
ply mains, local regulations of
your municipal water company
must be observed. In some areas connect-
ing directly to public drinking water supply
may require a backflow prevention device.
This is to ensure that there is no feedback
of chemicals into the water supply. Use a
suitable system separator manufactured
by KÄRCHER; or, as an alternative, a sys-
tem separator as per EN 12729 Type BA,
Water flowing throught a system separator
is considered non-drinkable.
n
Garden hose must be at least 16mm
diameter.
n
Flow rate of water supply must not fall
below 15 L/Min. (Liters per minute)
n
Flow rate can be determined by running
the water for one minute into an empty 19
L container.
n
The water supply temperature must not
exceed 104°F/40°C.
n
Never use the pressure washer to draw
in water contaminated with solvents, e.g.
paint thinners, gasoline, oil, etc.
n
Always prevent debris from being drawn
into the unit by using a clean water source.
Use additional water filter.
n
Do not operate pressure washer without
the water turned on.
Hardware (included)
ASSEMBLY INSTRUCTIONS
WATER SUPPLY (Cold Water Only)
IMPORTANT SAFETY INSTRUCTIONS
n
Do not leave machine running unattended.
n
Avoid tipping machine on its side.
SAVE THESE INSTRUCTIONS
Description
Purpose
Illustration
Qty
A
Knob
Joint Assembly
2
B
5/16" X 1 3/4
Bolt
Joint Assembly
2
C
5/16" X 2" Bolt
Hose Holder Assembly
1
D
Hose Holder
Hose Holder Assembly
1
E
High Pressure
Hose
Spray Gun Assembly
1
F
Spray Gun
Spray Gun Assembly
1
