background image

8

  English

 

  Be sure the machine is level when checking 

the oil level. (Refer to the engines operating 

manual for seasonal grades).

 

  We recommend that the oil be changed after 

the fi rst 5 hours of use, then once every 50 

hours.

  

STEP 

4:

 

  Fill gas tank with unleaded gasoline.

 

  Do not use leaded gasoline.

 

  Do not add oil to the gasoline.

  

STEP 

5:

 

  Pull back the spring loaded collar at the high 

pressure outlet and insert the high pressure 

hose.

 

  Release the collar and push the high pressure 

hose until the collar clicks.

 

 

CAUTION

 

  High pressure in quick connect area.

 

  Risk of injury caused by improperly locked 

high  pressure hose.

■ 

 

Make sure you hear the "click" when inserting 

the high pressure hose into the quick connec-

tion.

    Pull the high pressure hose to make sure it is 

seated properly before operating your  unit.

  

STEP 

6:

 

  Connect garden hose to unit`s water inlet.

 

 

WARNING

 

  High pressure in quick connect area.

 

  Risk of injury caused by improperly locked 

high pressure hose.

    Make sure you hear a "click" when inserting 

the high pressure hose in to the quick con-

nection.

  

CAUTION

 

  Engine shipped without oil. Before starting 

engine, fi ll with oil. Do not over-fi ll. Do not run 

the engine with a high or low oil level as this 

can cause engine damage.

 

  If you have further questions regarding the 

engine, please refer to the engine manual 

included with the unit.

 

 

CAUTION

 

  Never  start engine while handlebar is folded.

 

 

CAUTION

 

  Allow the engine to cool down before folding 

down the handlebar for storage. 

  

STEP 

3:

 

  Check oil level. Insert and remove dipstick 

without screwing it into the fi ller neck. Check 

the oil level shown on the dipstick.

FULL / MAX

ADD / MIN

OPERATING INSTRUCTIONS

HOT!

Summary of Contents for G 3200 XC
















Reviews: