English
5
ASSEMBLY INSTRUCTIONS
WATER SUPPLY (Cold Water Only)
Required Tools (included)
Hardware (included)
Description
7/16" (or 11mm) Wrench Stamped
Description
Purpose
Illustration
Qty
A
Joint
Joint Assembly
4
B
1/4" Nut
Joint Assembly
4
C
1/4" Bolt
Joint Assembly
4
D
3/8" Bolt
Joint Assembly
2
E
Knob
Joint Assembly
2
F
Anchor
Rivet
Nozzle Holder Assembly
4
CAUTION
When connecting to water supply mains, local
regulations of your municipal water company
must be observed. In some areas connecting
directly to public drinking water supply may
require a backfl ow prevention device. This is
to ensure that there is no feedback of chemi-
cals into the water supply. Use a water fi lter to
avoid potential damage from dirt in the water
supply.
■
Garden hose must be at least 5/8 inch
diameter.
■
Flow rate of water supply must not fall below
2.5 GPM (gallons per minute)
■
Flow rate can be determined by running the
water for one minute into an empty 5-gallon
container.
■
The water supply temperature must not ex-
ceed 122°F/50°C.
■
Never use the pressure washer to draw in
water contaminated with solvents, e.g. paint
thinners, gasoline, oil, etc.
■
Always prevent debris from being drawn into
the unit by using a clean water source. Use
additional water fi lter.
■
Do not operate pressure washer without the
water turned on.
