English
9
Please use exclusively KÄRCHER deter-
gents and care products to carry out the re-
spective cleaning task, as these were
specifically developped for your appliance.
The use of other detergents and care prod-
ucts may lead to premature wear and can
invalidate your warranty claims. Please ob-
tain information at your local dealer or re-
quest information directly from KÄRCHER.
Detergents can only be applied with the
black detergent nozzle.
Î
Install the black detergent nozzle for de-
tergent application (will work at low
pressure only).
Î
Fill a container with Kärcher detergent.
Place the filter end of detergent suction
tube into the container.
Î
With the engine running, pull trigger to
operate unit.
Liquid detergent is drawn into the unit
and mixed with water.
Apply detergent to work area.
Do not allow detergent to dry on sur-
face.
Î
Always
draw fresh water through the
detergent suction tube when the clean-
ing job is done, to rinse/flush any re-
maining detergents from the injection
system.
Î
Spray the detergent sparingly on the dry
surface and allow it to react, but not to
dry.
Î
Spray off loosened dirt with the high-
pressure jet.
Î
Release the lever on the trigger gun.
Note:
When the lever of the hand spray
gun is released, the engine continues to
run at zero speed. The water thus circu-
lates within the pump and gets heated.
When the water has reached the maxi-
mum permissible temperature (60°C),
the themostat valve opens and water
flows out.
Î
Lock the lever on the trigger gun.
Î
Insert the trigger gun in its holder.
During longer breaks (more than 5 min-
utes), also turn off the motor.
Î
Move the engine stop switch to the OFF
position.
For engine details see engine manual.
Î
Release trigger and engage gun safety
lock.
Caution
Only separate the high-pressure hose from
the trigger gun or the appliance while there
is no pressure in the system.
Î
After working with detergent, suspend
detergent suction hose in a container
filled with clear water, switch the appli-
ance on for around 1 minute once the
spray lance has been removed and
rinse until water runs clear.
Î
Move the engine stop switch to the OFF
position.
Î
Close the fuel valve.
Î
Turn off the water source.
Î
Press trigger to release water pressure.
Î
Release trigger and engage gun safety
lock.
Î
Disconnect the garden hose from the
water inlet on the unit.
Î
Disconnect the high pressure hose from
the high pressure outlet.
Working with detergent
Recommended cleaning method
Interrupting operation
Finish operation
Summary of Contents for G 2600 PH
Page 2: ...2...
