background image

English

We recommend that the oil be changed 
after the first 5 hours of use, then once 
every 50 hours.

 

Î

Fill gas tank with unleaded gasoline.

Do not use leaded gasoline.

Do not add oil to the gasoline.

Î

Connect the high pressure hose to the 
unit’s high pressure outlet.

Î

Connect garden hose to unit’s water in-
let.

Î

Connect garden hose to the cold water 
source and turn water on completely.
Do not use hot water.

Danger

The trigger gun is subjected to a recoil force 
when the water jet is discharged. Make 
sure that you have a firm footing and are 
also holding the trigger gun and spray lance 
firmly.

Î

Unlock the trigger gun safety lock. Trig-
ger the gun to eliminate trapped air, wait 
for a steady flow of water to emerge 
from the spray nozzle.

Î

Open fuel valve.
Pull the choke rod to the ON position 
(on a warm engine, leave the choke rod 
in the OFF position).

Î

Move the engine stop switch to the ON 
position.

For engine details see engine manual.

Î

Pull the starter handle.
If the engine fails to start after 3 pulls, 
squeeze the trigger gun to release pres-
sure, and repeat step.
After the engine warms up enough to 
run smoothly, move choke rod to OFF 
position.

The color-coded quick connect nozzles pro-
vide a wide array of spray widths from 0° to 
65° and are easily accessible when placed 
in the convenient nozzle holder.

For particularly stubborn accumulation of 
grime. 

Not recommended

 for soft materi-

als like sidings, decks, painted surfaces, 
cars.

For dirt accumulation over a large surface.

For moderate dirt accumulation over a large 
surface.

For operating with detergent or cleaning 
with low pressure.

WARNING

High pressure in nozzle area.
Risk of injury caused by improperly 
locked nozzle.

„

Make sure you hear a ‘click’ when in-
serting the nozzle tip into the wand.

„

Pull the nozzle to make sure it is seated 
properly before operating your unit.

Operation

Quick connect nozzles

0° spray angle = Red nozzle

25° spray angle = Green nozzle

40° spray angle = White nozzle

65° spray angle = Black detergent nozzle

Summary of Contents for G 2600 PH















Reviews: