Kärcher G 2000 QT, Operator'S Manual

Page: 6 / 40

6
OPERATING INSTRUCTIONS
Step 1
Check oil level. Oil level should always be
between the “FULL” and “ADD” marks on
the dipstick. Be sure the machine is level
when checking the oil level. (Refer to the
engine’s operating manual for seasonal
grades.).
Step 2
Fill gas tank with unleaded gasoline.
Do not use leaded gasoline.
Step 3
Connect the high pressure hose to the unit’s
high pressure outlet.
Step 4
Connect garden hose to unit’s water inlet.
Step 5
Connect garden hose to the cold water
source and turn water on completely.
Do not use hot water.
Step 6
Unlock the lock of the trigger gun.
Trigger the gun to eliminate trapped air, wait
for a steady flow of water to emerge from
the spray nozzle.
Step 7
Slide the throttle control to the RUN position.
Step 8
Push the primer ball three times.
Wait 3 seconds between each push.
Note: in cold weather push 5 times.
Step 9
Pull the starter handle. If the engine fails to
start after 3 pulls squeeze the trigger gun
to release pressure, and repeat step 9.
Important!
Do not run the engine with a high or low
oil level as this can cause engine damage.
If you have further questions regarding the
engine, please refer to the engine’s
operating manual included with the unit.