![background image](http://html.mh-extra.com/html/karcher/g-2000-mk/g-2000-mk_operators-manual_653850007.webp)
English
7
CAUTION
Too much oil can cause the engine to over-
heat. Signs include but are not limited to the
following: a decrease in engine perfor-
mance, oil leaking from the governor arm,
an oil seal, or the air filter.
To correct this, immediately drain the oil
from the engine and make sure you are us-
ing the correct amount of oil as shown pre-
viously.
Î
STEP 2:
Before starting the engine,
move the
CHOKE lever to the CHOKE position
as indicated
.
After engine has warmed and idles
smoothly,
move CHOKE lever to the
RUN position as indicated
.
Warm engine starting:
Move the CHOKE lever to the CHOKE
position as indicated in the previous
step. Once you have achieved stable
idle, move CHOKE lever back to RUN
position.
Î
STEP 3:
Connect the high pressure hose to the
unit’s high pressure outlet.
Î
STEP 4:
Connect garden hose to unit’s water in-
let.
Î
STEP 5:
Connect garden hose to the cold water
source and turn water on completely.
Do not use hot water.
Î
STEP 6:
If the trigger gun safety lock is engaged,
please disengage.
Hold the trigger gun open until all
trapped air is eliminated from the low
pressure water stream.
Î
STEP 7:
Check oil level.
Please see
STEP1
for details on min/
max levels
Î
STEP 8:
Fill gas tank with unleaded gasoline.
Do not use leaded gasoline.
Do not mix oil into the gasoline.