Kärcher FP 306, Manual

Page: 10 / 144

Deutsch
5
Note:
Always work with the filter bag inserted.
몇
Caution
Before inserting the mains plug, ensure that
the strut is located in a vertical position. The
appliance is switched off in this position.
Illustration
Î
Turn the upper cable hook and remove
the mains cable. Insert the mains plug into
a socket.
Illustration
Î
Press hold down the unlocking key. Pull
the shaft in the rear direction. The device
is activated.
Î
To stop the appliance, bring the strut back
to the vertical position until it locks.
It is recommended to perform the complete
care 2 to 3 times per year.
Î
Sweep, vacuum or wipe the floor or floor
covering with a moist rag if necessary.
Î
Use a mop to distribute the care product
evenly on the floor. Let dry completely
Notes : Please observe the instructions for
use of the flooring and care product man-
ufacturers!
Do not use care products containing sol-
vents.
Illustration
Î Drive across the surface multiple times as
shown in the illustration until the desired
shine is achieved.
Always move the appliance while it is run-
ning. Do not stay in one place for extend-
ed periods, because this could cause
damages to the flooring.
Note : Observe the manufacturer's in-
structions regarding when to walk on the
floor or move furniture, etc. We recom-
mend waiting at least 12 hours. During
this period, only walk on the surface care-
fully and not in street shoes. Do not move
any furniture and do not apply water to the
floor.
We recommend performing the maintenance care
procedures once per month to achieve an evenly
distributed shine.
Î Depending on the manufacturer, the care
product can be poured directly into the clean-
ing water. Please observe the instructions for
use of the flooring and care product manufac-
turers!
Î
Then polish the surface.
Î
Depending on the requirements and the use
of the floor (foot marks, streaks...), the care
coat can be polished multiple times without
the need of applying new care products to the
floor.
Î
Bring the strut back to a vertical position.
Appliance switches off.
Illustration
Î
Remove the mains plug and wrap it
around the hook provided at the strut.
First turn the upper cable hook upwards.
Ensure that the appliance moves on the trans-
port wheels while transporting it from one
room to another or moving it to its storage lo-
cation.
Illustration
Î
For this, press handle backwards and pull
the appliance.
We recommend activating the transport lock if
the appliance will not be used for extended
period of time.
Illustration
Î
Place the appliance on the floor so that
the polishing head is positioned perpen-
dicular to the surface.
Î
Remove the pad holder from the appli-
ance and place it into the storage com-
partment.
Î
Press the transport lock into the intake of
the pad holder on one side and hold it
there. Firmly press the other side of the
transport lock into the intake of the second
pad holder and lock into place.
Î
Store the appliance upright in a dry room.
Operation
Complete care
Remove the dirt from the floor
Applying care products
Polishing
Maintenance care
Intermediate care
Finish operation
Transporting the appliance
Storing the Appliance
10 English