background image

6

English

Do not use the device if the switch 
does not turn it on and off. Any power 
tool that cannot be controlled with the 
switch is dangerous and must be re-
paired.

Store idle device out of the reach of 
children and do not allow persons un-
familiar with the device or these in-
structions to operate the device. The 
device is dangerous in the hands of 
untrained users.

Maintain the device and accessories. 
Check for misalignment or binding of 
moving parts, breakage of parts and 
any other condition that may affect 
the device’s operation. If damaged, 
have the device repaired before use. 
Many accidents are caused by poorly 
maintained devices.

Disconnect the battery charger plug 
from the power source before making 
any adjustments, changing accesso-

ries, or storing the device. Such pre-
ventive safety measures reduce the 
risk of starting the device accidental-
ly.

To reduce the risk of fire, electric 
shock or injury:

Immediately replace a damaged bat-
tery charger together with charging 
cable with an original part.

Do not open, modify or repair the bat-
tery charger, the device or the bat-
tery. Repairs are only to be carried 
out by qualified personnel.

The device and the battery charger 
contain electrical components - do 
not clean the device or the battery 
charger under running water.

You may not charge the battery for 
longer than 24 hours without inter-
ruption.

Disconnect the charger from the 
electrical outlet when not in use as 

Summary of Contents for EDI 4

























Reviews: