18
DE 4002
2. Directions for use
Wallpaper remover (Order no. 2.863-076)
With the wallpaper remover you can use the steam
cleaner for stripping wallpaper.
• Procedure:
– Place the wallpaper remover with its entire
surface on the edge of a sheet of wallpaper.
Allow the steam to penetrate until the wallpaper
is soaked through (approx. 10 sec.).
– Without switching it off, move the wallpaper
remover to a new location. Use a putty knife to
lift the loosened wallpaper, and pull it off
completely.
– The steam may not be able to readily penetrate
woodchip wallpaper that has been painted
several times. In this case we recommend that
you go over the wallpaper with a spiked roller
before steam is applied.
Biological Descaler RM 511
(Order no. 6.290-239)
– 3 x 100 g powder for cleaning the boiler
– See Section 3.
Caddy
6.962-239
Set of circles of bristles
with brass bristles
2.863-075
Set of circles of bristles
2.863-077
Micro-fibre cloth
6.905-921
– As soon as the lamp on the iron extinguishes, it
is ready for use.
– As soon as you press the switch, a solenoid
valve in the main unit opens and steam flows
out of the base of the iron. If you push the
switch forwards, steam is expelled
continuously; if you push the switch towards the
rear, shots of steam are discharged.
– Begin by directing the steam onto a piece of
cloth until water no longer comes out of the iron.
– Turn the steam volume control on the main unit
to obtain the desired amount of steam.
– You can hold the iron vertically for steaming
curtains, clothes, etc.
Dry-ironing
– If you wish to iron without using steam, switch
the steam supply switch on the main unit to ON,
and the heater switch to OFF.
– Set the temperature dial for the desired fabric
type.
Synthetic fibres
Wool
Linen
Window nozzle (Order no. 4.130-145)
• Attach the window nozzle directly to the steam
gun. Use the extension tubes if required.
• Apply steam evenly to the glass surface from a
distance of approx. 20 cm. Switch off the steam
supply and squeegee the glass surface in straight
passes from top to bottom. Wipe the rubber lip
and the bottom edge of the window dry after each
pass.
