12
English
The suction turbine consists of 2 turbine motors in a casing. The
turbine unit must be completely replaced.
Î
Remove the cover with filter basket
Î
Remove the cover of the turbine coarse dirt filter, remove the
filter and clean it
Î
The cover is mounted on spacer discs, these must be re-
moved and saved.
Î
Loosen all 6 screws on the turbine unit
Î
Remove the turbine unit
Î
Disconnect the cable connection
Î
Remove the turbine unit from the rubber tub
Î
Guide the cable through the opening
Î
Do not damage the rubber tub
Î
Install the new turbine unit in reverse order.
Î
Install the filter and filter cover - watch for the correct position
of the spacer discs
Î
Install the cover with filter basket
Î
Remove the appliance cover
Î
Unscrew the fastening screws from the sides
Î
Loosen the adjustment screws on the guiderail (1)
Î
Pull away the holding angle (2)
Î
The fastening screw (3) is free and can be removed.
5.12 Replace suction turbine
5.13 Remove the brush head.
Summary of Contents for CV 66/2
Page 1: ...English 1 CV 66 2 Service Manual 5 906 479 0 Rev 00 01 09...
Page 18: ......
