English
15
Î
Connect the upper part of the vacuum
cleaner with the brush head.
Î
Connect the connecting hose to the
brush head and the upper part of the
vacuum cleaner.
Î
Insert the connection chord with plug into
the socket at the upper part of the vacu-
um cleaner (you must be able to hear the
plug locking in).
Î
Insert the hand pipe vertically into the
motor casing.
If the pipe end is worn out (happens when
you work without attaching the joint or uphol-
stery nozzle), the end switch does not get
activated and the brushes do not rotate.
Î
Replace hand pipe.
Î
Unlock the plug by pressing it in with a
sharp object (for e.g. screw driver).
Î
Loosen the connecting cable.
Î
Remove the connecting hose by turning
both the ends.
Î
Remove both the screws located on the
sides of the upper part of the vacuum
cleaner.
The warranty terms published by our com-
petent sales company are applicable in each
country. We will repair potential failures of
your appliance within the warranty period
free of charge, provided that such failure is
caused by faulty material or defects in fabri-
cation. In the event of a warranty claim
please contact your dealer or the nearest
authorized Customer Service center. Please
submit the proof of purchase.
– Only use accessories and spare parts
which have been approved by the manu-
facturer. The exclusive use of original ac-
cessories and original spare parts
ensures that the appliance can be oper-
ated safely and troublefree.
– At the end of the operating instructions
you will find a selected list of spare parts
that are often required.
Connecting cable has not locked in
properly
Brushes in the brush head are not
rotating; suction turbine is running
Hand pipe does not sit correctly in the
motor casing or is worn out
Separating the brush head from the
upper part of vacuum cleaner
Warranty
Accessories and Spare Parts
