English
13
If the indicator lamp glows red, check the fol-
lowing:
A Is the filter bag full?
B Is the suction or connection hose
blocked?
Î
Replace filter bag or remove the block-
age.
Note
There is no problem if the handpipe closes
when you are vacuum cleaning using the
suction hose and hence the indicator lamp
start to glow.
Î
Press the lid cover and remove the lid.
Î
Push the filter bag lock towards the left
until the filter bag can be removed from
the support.
Î
Insert the holder strip of the new filter
bag into the holder with the narrow side
towards the right.
Î
Move the filter bag lock towards the left
and push the holder strip over the sup-
port upwards until it locks in.
Î
Replace the lid.
Note
If the lid does not close, check whether the
filter bag has been inserted properly.
The safety filter must be replaced after you
have replaced the filter bag approx. 20
times.
Î
Press the lid cover and remove the lid.
Î
Lift the red lock and pull out the safety fil-
ter.
Î
Insert the new safety filter.
Note
If the lid does not close, check whether the
safety filter has been inserted properly.
The blower filter must be replaced after you
have replaced the filter bag approx. 20
times.
Î
Push away the blower filter from the cas-
ing and remove it.
Î
Insert new blower filter.
Indicator lamp
Maintenance and care
Replacing the filter bag
Changing the safety filter
Replacing the blower filter
