New Unit Information 02.2004
CV 30/1, CV 38/1
Unit functions
Page 19 / 25
Suction motor
1 Connection cable
2 Driving gear
3 Hexagon nut M5
4 Terminal strip/connection for suction
motor
5 Suction motor
6 Lower section of housing
5
Replace the suction motor
– Disconnect the connection cable (1) from the
terminal strip (4).
- Remove the suction motor (5).
Replace the driving gear
– Use flat nose pliers to hold the motor axle on
the rear of the electric motor (see arrow).
– Unscrew the hexagon nut (3) in a counter-
clockwise direction.
– Pull off the driving gear (2),
– Install a new driving gear in reverse order.
2
3
1
4
6
