English
BR VS 400 *USA
7
Releasing/locking the pushing
handle
Pull the catch upwards and hold
Tip the pushing handle backwards
Tip the pushing handle forwards;
*
The catch locks automatically
Starting/stopping the rotary
brushes
Pull the lower lever;
*
Rotary brush drive ON
Release the lower lever;
*
Rotary brush drive OFF
Measuring out the cleaning agent
Press the upper lever;
*
Cleaning agent feed ON
Release the upper lever;
*
Cleaning agent feed OFF
Note:
The cleaning agent feed is effected
only if the brush drive is switched on.
Steering the cleaner
Turn the pushing handle to the LEFT
*
Machine moves to the LEFT
Turn the pushing handle to the
RIGHT
*
Cleaner moves to the RIGHT
Changing the rotary brushes
–
Remove the tank
–
Carefully lay the cleaner down
–
Always refit two rotary brushes of
the same type
Press down and suspend the rotary
brushes
Remove the rotary brushes from the
gearing
–
Lay down the rotary brush on the
drive side (gearing)
–
Dismantle the second rotary brush
as described
Fit on a new rotary brush with the
gearing located on the drive
–
Press the rotary brush down and
place it into the thrust bearing
–
Install the second new rotary brush
as described
–
Check that the rotary brushes are
in the correct position
–
Position the cleaner vertically
All manuals and user guides at all-guides.com
