10
Safety
Grounding Instructions
THIS PRODUCT IS FOR COMMERCIAL USE
ONLY.
Electrical:
In the USA this machine operates on a standard 15
amp 115V, 60 hz, A.C. power circuit . The amp, hertz,
and voltage are listed on the data label found on each
machine. Using voltages above or below those
indicated on the data label will cause serious damage
to the motors.
Extension Cords:
If an extension cord is used, the wire size must be at
least one size larger than the power cord on the
machine, and must be limited to 50 feet (15.5m) in
length.
Grounding Instructions:
This appliance must be grounded. If it should
malfunction or break down, grounding provides a
path of least resistance for electric current to reduce
the risk of electric shock. This appliance is equipped
with a cord having an equipment-grounding
conductor and grounding plug. The plug must be
inserted into an appropriate outlet that is properly
installed and grounded in accordance with all local
codes and ordinances.
This appliance is for use on a nominal 120-volt circuit,
and has a grounded plug that looks like the plug in
“Fig. A”. A temporary adaptor that looks like the
adaptor in “Fig. C” may be used to connect this plug
to a 2-pole receptacle as shown in “Fig. B”, if a
properly grounded outlet is not available. The
temporary adaptor should be used only until a
properly grounded outlet (Fig. A) can be installed by a
qualified electrician. The green colored rigid ear, lug,
or the like extending from the adaptor must be
connected to a permanent ground such as a properly
grounded outlet box cover. Whenever the adaptor is
used, it must be held in place by a metal screw.
Improper connection of the equipment-grounding
conductor can result in a risk of electric shock.
Check with a qualified electrician or service
person if you are in doubt as to whether the outlet
is properly grounded. Do not modify the plug
provided with the appliance - if it will not fit the
outlet, have a proper outlet installed by a
qualified electrician. Use only GFCI protected
receptacles.
Une connexion non conforme du conducteur de
mise à la terre de l’appareil peut provoquer une
dé charge électrique. Consulter un électricien
qualifié ou une personne du service aprés vente
si vous suspectez que la prise de courant n’est
pas correctement mise à la terre. Ne pas modifier
la fiche fournie avec l’appareil - si elle ne rentre
pas dans la prise, faites installer une prise appr-
ropriée par un électricien qualifié. Utilisez-le
uniquement sur des réceptacles protégés GFCI.
86386990 Operators Manual - Floor Polisher
