Kärcher BD Trike BAT, Manual

Page: 36 / 498

Operating Instructions English
36
Stopping and switching off
the unit
„
Raise and lock the brush head
To do this, depress the brush head
pedal and lock by simultaneously tilting it
backwards.
The motor switches off automatically.
„
Move the unit another 1–2 m to extract
any remaining water.
„
Raise the suction bar.
To do this, depress the suction bar pedal
and lock by gently pushing it to the left.
The suction motor coasts for a further
10 seconds to extract remaining water out
of the suction bar and vacuum channels.
„
Set the key switch on the control panel
to “
O ” and remove the key.
Draining the dirty water
Caution!
Observe local regulations for
the treatment of waste water.
„
Take the drainage hose out of the holder
and place in a suitable receptacle. Drain
off the dirty water by opening the
metering equipment. Then rinse out the
dirty-water tank with fresh water.
Adjusting the suction bar
Rotating the suction bar
To improve the suction result on ceramic
coverings, the suction bar can be rotated by
up to 5°:
„
Loosen the star knobs.
„
Rotate the suction bar.
„
Tighten the star knobs.
Tilting the suction bar
If the suction result is unsatisfactory,
the straight suction bar can be tilted.
„
Loosen the wing nuts.
„
Tilt the suction bar.
„
Tighten the wing nuts.