background image

English

3

Contents

General notes

Read these original operating instruc-

tions and the enclosed safety instruc-

tions before using the device for the first 

time. Proceed accordingly.

Keep both books for future reference or for future own-

ers.

Function

This floor scrubber is used for the wet cleaning or pol-

ishing of level floors.

The appliance can be adjusted to suit the respective 

cleaning task by setting the water volume, contact pres-

sure of the brusches and driving speed.

Intended use

Use this appliance only as directed in the following op-

erating instructions.

The appliance may only be used for the cleaning of 

hard surfaces that are not sensitive to moisture and 

polishing operations.

The appliance is intended for inside use.

The working temperature of the appliance ranges 

from +5°C to +40°C.

The appliance is not suited for the cleaning of frozen 

ground (e.g. in cold stores).

The appliance is suitable for a max. water depth of 

1 cm. Do not drive into an area where there is a risk 

of this max. water height being exceeded.

The appliance may only be equipped with original 

accessories and spare parts.

The appliance is not intended for the cleaning of 

public traffic routes.

The appliance should not be used on surfaces that 

are sensitive to pressure.

Please consider the allowed load per surface unit of the 

floor. Details of the load per surface unit can be found in 

the technical data.

The appliance is not suited for the use in potentially 

explosive environments.

The appliance should not be used to suck in flam-

mable gases, undiluted acids or solvents.

This includes petrol, thinning agents or hot oil that can 

form an explosive mixture when it comes in contact with 

sucked air. Do not use acetone, undiluted acids and sol-

vents as they are aggressive towards the materials of 

which the appliance is made.

Environmental protection

The packing materials can be recycled. Please 

dispose of packaging in accordance with the en-

vironmental regulations.

Electrical and electronic appliances contain valu-

able, recyclable materials and often components 

such as batteries, rechargeable batteries or oil, 

which - if handled or disposed of incorrectly - can 

pose a potential threat to human health and the environ-

ment. However, these components are required for the 

correct operation of the appliance. Appliances marked 

by this symbol are not allowed to be disposed of togeth-

er with the household rubbish.

Notes on the content materials (REACH)

Current information on content materials can be found 

at: 

www.kaercher.com/REACH

Accessories and spare parts

Only use original accessories and original spare parts. 

They ensure that the appliance will run fault-free and 

safely.

Information on accessories and spare parts can be 

found at 

www.kaercher.com

.

Scope of delivery

The scope of delivery for the appliance is shown on the 

packaging. Check the contents for completeness when 

unpacking. If any accessories are missing or in the 

event of any shipping damage, please notify your deal-

er.

Safety instructions

Please read the operating instructions for the device 

before using it, and pay particular attention to the fol-

lowing safety instructions.

Warning and information plates on the machine pro-

vide important directions for safe operation.

Apart from the notes contained herein the general 

safety provisions and rules for the prevention of ac-

cidents of the legislator must be observed.

 

WARNING

Device tipping over

Danger of injury!

The device is approved for operation on surfaces with 

a specified limited slope (see the Technical data 

chapter).

The device may only be operated when the hood and 

all covers are closed.

Hazard levels

DANGER

Indication of an imminent

threat of danger that will lead

to severe injuries or even

death.

WARNING

Indication of a potentially dan-

gerous situation that may lead

to severe injuries or even

death.

CAUTION

Indication of a potentially dan-

gerous situation that may lead

to minor injuries.

ATTENTION

Indication of a potentially dan-

gerous situation that may lead

to damage to property.

Electrical connections

Note

The voltage indicated on the type plate must corre-

spond to the voltage of the electrical source.

Safety class I - Appliances may only be connected

to sockets with proper earthing.

While working with fluids (such as detergents), we 

recommend the use of a safe socket with overcur-

rent protection switch (max. 30 mA).

Please use the mains cable prescribed by the man-

ufacturer; the same is also applicable when you re-

place the cables. See Operating Instructions 

Manual for Order Number and Type.

Check the power cord with mains plug for damage 

before every use. If the power cord is damaged, 

please arrange immediately for the exchange by an 

authorized customer service or a skilled electrician.

The appliance may only be connected to an electri-

cal supply which has been installed by an electrician 

in accordance with IEC 60364.

Never touch the mains plug with wet hands.

Make sure that the power cord or extension cables 

are not damaged by running over, pinching,  ragging 

or similar. Protect the cable from heat, oil, and sharp 

edges.

The power cord must be checked regularly for dam-

ages, such as cracks or aging. If damage is found, 

the cable must be replaced before further use.

If couplings of the power cord or extension cable are 

replace the splash protection and the mechanical

tightness must be ensured.

Do not clean the appliance with a water hose or 

high-pressure water jet (danger of short circuits or

other damage).

ATTENTION

Operating procedures create short term power sink-

ings.

During unfavorable net conditions other devices 

might be disturbed.

With a net impedance lower then 0.15 Ohm no dis-

turbances are to be expected.

Application

DANGER

Appliances with working equipment, specifically the 

power cord and the extension cable, must be 

checked to ensure that it is in proper working order 

and is operating safely prior to use. Otherwise, im-

mediately pull out the power plug. The appliance 

must not be used.

The water level limiter must be cleaned regularly

and checked for signs of damage.

Never spray and vacuum up explosive liquids, com-

bustible gases, explosive dusts as well as undiluted 

acids and solvents! This includes petrol, paint thin-

ner or heating oil which can generate explosive 

fumes or mixtures upon contact with the suction air. 

Acetone, undiluted acids and solvents must also be 

avoided as they can harm the materials on the ma-

chine.

Do not vacuum up any burning or glowing objects.

Humans and animals must not be vacuumed with 

this appliance.

Appliances may not be used in outside areas in low

temperatures.

If the appliance is used in hazardous areas (e.g. fill-

ing stations) the corresponding safety provisions 

must be observed. It is not allowed to use the appli-

ance in hazardous locations.

Only use cleaners recommended by the manufac-

turer and comply with their application, disposal and 

warning guidelines.

Do not use the recommended detergents in an un-

diluted state. The products are safe for operations 

as they do not contain any acids, alkalis or environ-

ment hazardous substances. We recommend to 

keep the detergents out of reach of children. If the 

detergent comes in contact with the eyes, please 

rinse the eyes thoroughly with water and consult a 

doctor immediately if the detergent has been swal-

lowed.

CAUTION

The appliance is not suitable for vacuuming dust 

which endangers health.

Please follow the statutory regulations for disposing 

off dirt water and alkalis.

ATTENTION

The socket on the device may only be used to con-

nect the attachments and accessories mentioned in 

the operating instructions.

The appliance is not a vacuum cleaner! Never suck 

in more fluid than what has been sprayed. Do not 

use to suck in drydust!

Appliance suited for moist to wet floors with a max. 

water level of approx. 1 cm. Do not drive into an area 

where there is a risk of this max. water level being 

exceeded.

The machine is only suitable for use on the types of

surfaces specified in the operating instructions.

Protect the appliance against frost.

Operation

DANGER

The operator must use the appliance properly. The 

person must consider the local conditions and must 

pay attention to third parties, in particular children, 

when working with the appliance.

Never leave the machine unattended so long as the 

engine is running. The operator must not leave the 

device before the engine has been shut down, the

device has been protected against accidental move-

ment, the parking brake has been applied and the 

ignition key / intelligent key has been removed.

Always use appropriate gloves while working on the 

device.

In order to prevent unauthorised use of devices that 

are provided with an ignition key / intelligent key, the 

ignition key / intelligent key must be removed.

This machine is not intended for use by persons (in-

cluding children) with reduced physical, sensory or 

mental capabilities, or lack of experience and knowl-

edge.

 Children should be supervised to prevent them from

playing with the appliance.

Turn off the appliance immediately in case of leaks.

 Caution! Switch the appliance off immediately in 

case foam or liquid escape!

Do not open the hood when the motor is running.

On tilted surfaces, the tilt angle and the driving di-

rection should not exceed the values given in the 

Operating Instructions.

General notes ......................................................

3

Function ...............................................................

Intended use ........................................................

Environmental protection......................................

Accessories and spare parts................................       3

Scope of delivery .................................................

Safety instructions................................................

Description of the appliance.................................      5

Installation............................................................

Initial startup.........................................................

Operation..............................................................       7

Transport............................................................... 

Storage...........................................................

.

......

Care and maintenance......................................... 

Troubleshooting guide..........................................

10

Warranty............................................................... 

Technical data .....................................................

3

3

3

3

3

6

6

11

11

8

8

8

Summary of Contents for BD 90 R Classic Bp













Reviews: