-
7
1 Wear indicator
2 Vacuum lip
The vacuum lips must be replaced or
reversed if they are worn down to the
wear indicator.
Remove the vacuum bar.
Unscrew the star grips.
Remove the plastic parts.
Remove the vacuum lips.
Insert new or reversed vacuum lips.
Insert the plastic parts.
Screw in and tighten the star grips.
Push down the device holding the
push handle so that the cleaning
head is raised.
Press the pedal for changing the
brushes downward beyond its re-
sistance.
Pull the device towards the back so
that the disc brush becomes acces-
sible.
Place a new disc brush on the floor
in front of the device.
Drive the device with the raised
cleaning head over the new disc
brush and lower the cleaning head.
The brush locks into the drive.
Drain off dirt water.
Lift up the waste water tank and put
it aside.
To ensure a reliable operation of the
appliance maintenance contracts can
be concluded with the competent
Kärcher sales office.
In case of danger of frost:
Empty the fresh and waste water
tank.
Store the appliance in a frost-pro-
tected room.
Maintenance Works
Replace or turn vacuum lips
Replacing the disk brushes
Removing the waste water tank
Maintenance contract
Frost protection
9
EN
Summary of Contents for BD 50/60 C Ep Classic
Page 1: ...BD 50 60 C Ep Classic 59654950 02 18 English 3 Français 12 Español 21 ...
Page 2: ...2 ...
Page 30: ......
Page 31: ......