Kärcher B 40 C Bp, Operating Instructions Manual

Page: 19 / 276

-
7
Caution
When the batteries are installed and re-
moved, the stability of the appliance can be
compromised; ensure a safe stance.
 Connect the connection cable to the
free battery poles (+) and (-).
 Connect pole using the enclosed con-
necting cable.
몇
Warning
Pay attention to correct poles.
Installation sketch for 2 batteries
 Swivel the water reservoir all the way
down, check the lock.
Note
Charge the batteries before commissioning
the appliance.
See also "Charging the batteries".
Caution
‏ Risk of damage due to tipping appliance;
remove batteries only if the appliance is
equipped with a cleaning head.
 Set the programme selector switch to
"OFF".

Push the appliance forward about 2 m
so that the steering rollers point toward
the rear.

Lower the cleaning head.
 Loosen the tank lock and tilt the tank
upwards.
 Clamp off the minus pole of the battery.
 Clamp off the remaining cables from the
battery.
 Remove the support blocks or the foam
pieces.
Caution
When the batteries are installed and re-
moved, the stability of the appliance can be
compromised; ensure a safe stance.
 Remove the batteries.
 Dispose of the used batteries according
to the local provisions.
To ensure a reliable operation of the appli-
ance maintenance contracts can be con-
cluded with the competent Kärcher sales
office.
In case of danger of frost:
 Empty the fresh and dirt water reser-
voirs.
 Store the appliance in a frost-protected
room.
Removing the batteries
Maintenance contract
Frost protection
19 EN