English 6
wheels may be worn and in need of
replacement
Striking any raised obstacle while
using the Surface Cleaner will cause
damage to the unit. If contact does
occur and causes vibration when
operating, stop use immediately.
Continuing to operate the Surface
Cleaner could result in serious injury.
NOTE: Always squeeze the gun’s
trigger to release any residual pressure
immediately after use. Engage the
trigger lock when not in use.
After cleaning is finished, remove the
Surface Cleaner and store indoors.
A clogged or dirty nozzle will result in
excessive pump pressure causing a
pulsing sensation.
1. Turn off the pressure washer and turn
off water supply. Release the residual
pressure by squeezing the gun’s
trigger.
2. Disconnect the Surface Cleaner from
the pressure washer.
3. Using an appropriate sized wrench
(not included) remove the nozzle
from the spray bar.
4. Using the included nozzle cleaner,
free any foreign material clogging the
nozzle.
5. Use a garden hose to flush debris out
of the nozzle. Direct the flow of water
through the nozzle backward from
the outside to the inside.
6. Reinstall the nozzle to the spray bar.
Tighten securely. Align the nozzle
opening with the spray bar.
7. Reconnect the Surface Cleaner to
the pressure washer.
Storage
Maintenance
