Kärcher 4.762-010.0, Quick Start Manual

Page: 5 / 7

– 3
In addition to the wet jet appliance, you will
need a nozzle package. The nozzle pack-
age must be adjusted to the high pressure
cleaner used.
 Unscrew the nozzle from the spray pipe
of the high pressure cleaner.
 Install the nozzle holder of the wet jet
appliance on the spray lance with the
spray nozzle installed.
 Screw the nozzle holder tightly onto the
spray lance.
 Loosen the clamping screw of the noz-
zle holder.
 Rotate the nozzle holder until the spraying
agent hose is pointing toward the top.
 Tighten the clamping screw of the noz-
zle holder.
Caution
Increased risk of damage when using a bo-
ron carbide spray nozzle. Boron carbine
spray nozzles are sensitive to impact. Do
not use a hammer for the installation or re-
moval. Do not overtighten the clamping
screw of the spray nozzle.
 Insert the spray nozzle into the nozzle
holder.
 Tighten the spray nozzle clamping
screw.
 Fasten the spraying agent hose to the
spray lance using clamps. Do not stretch
or kink the hose.
 Insert the suction pipe into the spraying
agent container or the spraying agent
bag.
Note:
Keep the spraying agent dry. Wet spraying
agent will cause malfunctions.
 Start up the high pressure cleaner.
 Press the lever on the hand spray gun.
 Perform the spraying task.
Note:
Dispose of the used spraying agent accord-
ing to the local provisions.
The volume of the suctioned spraying
agent is adjusted on the air bore and the
spraying agent bore.
 Open the spraying agent bore.
 Close the air bore.
 Close the spraying agent bore.
 Open the air bore.
Before Startup
Nozzles packet
Nozzle size
Order No.
35 2.638-526.0
40 2.637-900.0
45 2.637-901.0
50 2.637-902.0
55 2.637-903.0
60 2.637-904.0
65 2.637-905.0
70 2.637-906.0
75 2.637-907.0
80 2.637-908.0
100 2.637-910.0
Born carbide nozzles (low wear)
up to 1,000 l/h 6.415-084.0
from 1,000 l/h 6.415-083.0
Start up
Operations
Adjust the spraying agent volume
(for 4.762-010.0 only)
Increase the spraying agent volume.
Decrease spraying agent volume
Standard setting
Spraying
agent grit Spraying
agent bore Air bore
8 3/4 open 1/2 open
9 1/2 open 3/4...1 open
9 EN