English
13
3. Switch the device off "0/OFF" during
work breaks longer than 5 minutes.
Finishing operation
몇
CAUTION
Pressure in the system
Injuries from high-pressure water es-
caping uncontrollably
Only disconnect the high-pressure
hose from the trigger gun or the device
when the system is fully depressur-
ised.
1. Release the lever of the trigger gun.
2. Close the water tap.
3. Press the lever of the trigger gun for
30 seconds.
The pressure remaining in the sys-
tem is discharged.
4. Release the lever of the trigger gun.
5. Lock the lever of the trigger gun.
6. Disconnect the device from the wa-
ter supply.
7. Switch off the device "0/OFF".
8. Pull the mains plug out of the socket.
Transport
몇
CAUTION
Failure to observe the weight
Risk of injury and damage
Be aware of the weight of the device
during transportation.
Carrying the device
1. Lift up the device by the carrying
handle, and carry it.
Transporting the device in a
vehicle
1. Secure the device against slipping
and tipping over.
Storage
몇
CAUTION
Failure to observe the weight
Risk of injury and damage
Be aware of the weight of the device
during storage.
Storing the device
1. Place the device on a level surface.
2. Disconnect the spray lance from the
high-pressure gun.
3. Disconnect the high-pressure gun
from the high-pressure hose.
4. Store the mains connection cable
and accessories on the device.
5. Store the high-pressure hose on the
device.
Observe the additional instructions be-
fore storing the device for a longer pe-
riod of time, see chapter Care and
Frost protection
ATTENTION
Danger of frost
Incompletely emptied devices can be
destroyed by frost.
Completely empty the device and ac-
cessories.
Protect the device from frost.
The following requirements must be
satisfied:
The device is disconnected from the
water supply.
The high-pressure hose is removed.
1. Switch the device on "I/ON".
