![background image](http://html.mh-extra.com/html/karcher/1-599-103-0/1-599-103-0_operators-manual_653785011.webp)
English
11
GFCI INSTRUCTIONS
1. Plug the Ground Fault Circuit Inter-
rupter (GFCI) into a working outlet.
2. Press “TEST”, then press “RESET”
to assure proper connection.
Note: The actual appearance of the
GFCI may be different from this illus-
tration.
Operation
ATTENTION
Pump running dry
Damage to the device
If pressure does not build up in the de-
vice after 2 minutes then switch the de-
vice off and proceed according to the
instructions in chapter Troubleshoot-
High pressure operation
Note
Maintain a spraying distance of at
least 12 inches (30 cm) when clean-
ing the painted surfaces.
Do not position the spray wands
closer than 24 inches (60 cm) (or 2
feet) when washing a vehicle.
Do not use the dirt blaster to clean
car
tires
, paint or sensitive surfaces
(e.g. wooden surface).
1. Insert the spray lance into the trigger
gun, and turn the spray lance by 90°
to lock it.
2. Set the device switch to “1/ON”.
3. Unlock the lever on the trigger gun.