Kärcher 1.516-331.0, Manual, Page: 10 / 138

10 English
Accessories and spare parts
Only use original accessories and original spare parts.
They ensure that the appliance will run fault-free and
safely.
Information on accessories and spare parts can be
found at
www.kaercher.com
.
Scope of delivery
The scope of delivery for the appliance is shown on the
packaging. Check the contents for completeness when
unpacking. If any accessories are missing or in the
event of any shipping damage, please notify your deal-
er.
Warranty
The warranty conditions issued by our relevant sales
company apply in all countries. We shall remedy possi-
ble malfunctions on your appliance within the warranty
period free of cost, provided that a material or manufac-
turing defect is the cause. In a warranty case, please
contact your dealer (with the purchase receipt) or the
next authorised customer service site.
(See overleaf for the address)
Safety devices
몇
CAUTION
Missing or modified safety devices
Safety devices are provided for your own protection.
Never modify or bypass safety devices.
Symbols on the appliance
(according to type of appliance)
Safety lock
The safety lock seals the steam boiler from the steam
pressure present. If the pressure regulator is defective
and overpressure occurs in the steam boiler, an pres-
sure relief valve opens in the safety lock and steam
leaks out through the lock.
Prior to restarting the appliance, contact the responsible
KÄRCHER Customer Service.
Appliance description
The maximum amount of equipment is described in
these operating instructions. Depending on the model
used, there are differences in the scope of delivery (see
packaging).
For the figures, please refer to the graphics page.
Illustration A
1
Safety lock
2
Filling hole for water
3
Switch
4
Child lock
5
Carrying handle
6
Grid connection cable with mains plug
7
Indicator light (green) - grid voltage present
8
Steam boiler
9
Steam nozzle
10
Unlocking button
11
Steam hose
12
Steam gun
13
Unlocking button
14
Steam connector
15
Spotlight nozzle
16
Round brush
17
Power nozzle
18
Manual nozzle
19
Manual nozzle microfibre cover
20
Extension tubes (2 pcs)
21
Unlocking button
22
Floor nozzle
23
Chain connection
24
Micro fibre cloth
25
Measuring jug
* SC 1 Premium
** SC 1 EasyFix (yellow)
*** SC 1 EasyFix Premium
Initial Start-Up
During initial start-up, a small cloud of smoke may be
emitted from the steam nozzle. The appliance requires
a short run-in time. At the start, the steam output is very
irregular and damp, single droplets of water may even
leak out. The steam volume that leaks out increases
constantly until the maximum quantity has been
reached after approx. 1 minute.
Installation
Installing accessories
1. Push the open end of the accessory onto the steam
nozzle or steam gun until the unlocking button of the
steam nozzle or steam gun engages.
Illustration F
Illustration I
Illustration J
2. Push the open end of the accessory onto the spot-
light nozzle.
Illustration K
3. Connect the connection pipes with the steam nozzle
or steam gun.
a Push the 1st extension tube onto the steam noz-
zle or steam gun until the unlocking button of the
steam nozzle or steam gun engages.
The connection pipe is connected.
Risk of burns, surface of appliance be-
comes hot during operation
Risk of scalding from steam
Read operating instructions
****
**
***
**
***
**
***