background image

 Operating instructions

KM 85/50 W B

English

33

Unit vibrations (ISO 5349)

Upper limbs

2,4 m/s²

Ambient conditions

Temperature

-5 - +40°C

Air humidity, non-dew developing

0-90%

Noise emission

Sound level (EN 60704-1)75 dB(A)

Guaranteed noise level

(2000/14/EU)

92 dB(A)

EC conformity declaration

We hereby declare that the machine

specified below

as the marketed desigh, the

machine specified below

complies with the relevant

fundamental safety and health

requirements of the EC directives

listed below.

Modification of the machine without

our approval invalidates this

declaration.

Product: Sweeper
Type: 1.351-xxx

Relevant EC directives

EC machine directive (98/37/EC)

EC directive on electromagnetic

compatability (89/336/EEC)

amended by 91/263/EEC,

92/31/EEC, 93/68/EEC

EC guideline on noise emissions

(2000/14/EU)

Applied harmonised standards

DIN EN 60335-1

DIN EN 60335-2-72

DIN EN 50082-2:1994

Applied national standards

CISPR 12

Applied conformity valuation

method

Appendix V
Measured noise level:

90 dB(A)
Guaranteed noise level:

92 dB(A)
Internal measures ensure that the in

series produced units always

comply with the requirements of

current EC directives and applied

standards. The signatories act for

and in authority of management.

5.957-708 (04/02)
Alfred Kärcher Limited Partnership.

Registered office: Winnenden.

Company Register: Waiblingen,

HRA 169.

Personally liable partner. Kärcher

Reinigungstechnik GmbH.

Registered office Winnenden, 2404

Waiblingen Company Register, HRB

Managing directors:

Dr. Bernhard Graf, Hartmut Jenner,

Georg Metz, Thomas Schöbinger
Alfred Kärcher GmbH & Co.

Cleaning Systems

Alfred-Kärcher-Strasse 28-40

P.O.Box 160

D-71349 Winnenden

Phone: ++49 7195 14-0

Fax :++49 7195 14-2212

Summary of Contents for 1.351-105.0


















Reviews: