– 8
Note
: Clean the intermediate filter at least every 8
weeks with normal use. If the suction performance is de-
teriorating, the filter must be cleaned sooner.
Use a commerically available soft household sponge to
clean the filter to avoid damaging the coated fins.
Illustration
The individual fins of the intermediate filter can be
cleaned under running water using the sponge.
Allow the filter to dry completely.
With normal use, replace the intermediate filter at
least every 12 months, if necessary, it can be re-
placed sooner.
Note
: The intermediate filter must be disposed off
as residual waste.
Illustration
Suction hose and handle can be disassembled for
cleaning.
Check the accessories for obstructions and clean if
necessary. Do not use water to clean the floor nozzle.
* depending on model
Cut hair that is entangled in the roller brush along the
cutting edge with a pair of scissors, and vacuum them
off using the crevice nozzle.
Note
: In order to ensure an optimised cleaning perfor-
mance and function of the appliance, this filter must be
changed at least every 12 months. Replace sooner if
damaged or extremely dirty.
Caution
Do not rinse out the HEPA filter!
Remove the outgoing air flap.
Illustration
Remove the HEPA filter.
Insert a new HEPA filter so that it "CLICKS" into
place.
Reinstall the lid so it "CLICKS" into place.
Subject to technical modifications!
You can rectify minor faults yourself with the help of the
following overview.
If in doubt, please consult the authorized customer ser-
vice.
Power supply is interrupted
Remove the mains plug, check the connecting ca-
ble and the mains plug for damage.
Reinsert the baffle plate correctly.
(see: FILLING THE WATER FILTER RESER-
VOIR)
Check the intermediate filter.
Wash the filter, install new intermediate filter if re-
quired.
(see: CARE, MAINTENANCE)
Let the intermediate filter dry or install new dry filter.
(see: CARE, MAINTENANCE)
Replace the water and add 1 to 2 capfuls of Foam-
Stop. Check the intermediate filter for moisture. If
necessary, clean the damp filter under running wa-
ter and allow it to dry afterwards or install new filter.
Check the MIN / MAX marks on the reservoir.
Replace the HEPA filter.
(see: CARE, MAINTENANCE)
Remove the blockage.
(see: CARE, MAINTENANCE)
Close the false air slide.
(see: WORKING WITH THE FLOOR NOZZLE)
Properly install the cover of the water filter contain-
er.
Remove the water filter and correctly insert it into
the appliance.
(see: FILLING THE WATER FILTER RESER-
VOIR)
Maintenance and Care
Cleaning/replacing the intermediate filter
Cleaning the appliance and accessories
Clean the turbo floor nozzle
Change HEPA filter
Technical specifications
Kärcher
DS 6
DS 6 Premium
Nominal voltage
1~50-60 Hz
220-240
V
Fill capacity of the water filter
reservoir
2,0
l
Weight (without accessories)
7,5
kg
Nominal width, accessories
35
mm
Eco design as per 666/2013
Sound power level L
WA
80
dB(A)
Rated power input
650
W
DS 6 Premium:
HEPA filter H 13 class according to EN 1822 (effective 1998)
DS 6:
HEPA filter H 12 class according to EN 1822 (effective
1998)
Troubleshooting
Appliance does not vacuum
Weak/diminishing suction power
Forgot the baffle plate or not inserted correctly
Intermediate filter missing or not inserted correctly
Intermediate filter is dirty
Intermediate filter is wet
Strong foam generation in the water filter reservoir
Too little or too much water in the water filter
reservoir
HEPA filter is soiled
Accessory is blocked
False air slide at the handle is open
Appliance flap does not close
The cover of the water filter is not properly installed
The water filter is not properly installed
13
EN
