Operating Manual HDS Standard 9.808-214.0
OPERA
TOR’S MANU
AL
PRESSURE
W
ASHER
14
2x blinking
Fault in the voltage supply or current pickup of the motor
too high.
• Check main connections and mains fuse.
• Inform Customer Service
3x blinking
Motor overload/overheat
• Set the appliance switch to "0/OFF“.
• Allow device to cool down.
• Turn on the appliance.
Error occurs repeatedly.
• Inform Customer Service
4x blinking
The exhaust temperature limiter has been triggered.
• Set the appliance switch to "0/OFF“.
• Allow device to cool down.
• Turn on the appliance.
Error occurs repeatedly.
• Inform Customer Service
5x blink
Obstructed reed switch in the lack of water fuse or
magnetic piston stuck.
• Inform Customer Service
Fuel Indicator Lamp Glows
Fuel tank empty.
• Refill fuel.
Indicator Lamp System Care Is Illuminated
System care container is empty.
• Refill system care.
Appliance Is Not Running
No power
• Check power connection/conduit.
Device Is Not Building Up Pressure
Air within the system
Vent pump:
• Set dosing value for detergent to "0".
• With open hand spray gun turn device on and off multiple
times with the device switch.
• Open and close the pressure/quantity regulation at the
pump unit with the hand spray gun open.
PREVENTIVE MAINTENANCE AND SERVICE
Relief Valve
WARNING: The relief valve on this pressure washer
has been factory set and sealed and is a field
nonadjustable part. Tampering with the factory setting
may cause personal injury and/or property damage,
and will void the manufacturer warranty.
If pressure from pump exceed safe limits, the relief valve
will open, allowing high pressure to be discharged through
hose to ground.
Caution: Inspect relief valve annually for any
obstruction.
TROUBLESHOOTING
1. Ready for use: indicator lamp
2. Fuel indicator lamp
3. Indicator lamp service
4. Indicator lamp system care
DANGER: Risk of injury by inadvertent startup of
appliance and electrical shock
.
First pull out the plug from the mains before carrying
out any tasks on the machine.
Indicator Lamp "Ready For Use" Turns OFF
No line voltage, see "Appliance is not running".
Indicator Lamp Service
Indicator lamp service will be illuminated
Lack of oil
• Replenish oil.
1x blinking
Water shortage
• Check water supply, check connections.
Leak in the high pressure system
• Check high pressure system and connections for
tightness.
1
3
2
4
