background image

Manual Dual Mister 9.808-246.0 - E

    

PRESSURE 

W

ASHER   

SER

VICE MANU

AL

4

INTRODUCTION & IMPORTANT SAFETY INFORMATION

Thank you for purchasing this Pressure Washer.
We reserve the right to make changes at any time 
without incurring any obligation.

Owner/User Responsibility:

The owner and/or user must have an understanding of 
the manufacturer’s operating instructions and warnings 
before using this pressure washer. Warning information 
should be emphasized and understood. If the operator 
is not fluent in English, the manufacturer’s instructions 
and warnings shall be read to and discussed with 
the operator in the operator’s native language by the 
purchaser/owner, making sure that the operator com-
prehends its contents.
Owner and/or user must study and maintain for future 
reference the manufacturers’ instructions.
The operator must know how to stop the machine 
quickly and understand the operation of all controls. 
Never permit anyone to operate the engine without 
proper instructions.

SAVE THESE INSTRUCTIONS 

This manual should be considered a permanent 
part of the machine and should remain with it if 
machine is resold.
When ordering parts, please specify model and 
serial number. Use only identical replacement parts.
This machine is to be used only by trained operators.

IMPORTANT SAFETY 

INFORMATION

READ OPERATOR’S 

MANUAL THOROUGHLY 

PRIOR TO USE.

WARNING: To reduce the risk of 

injury, read operating instruc-
tions carefully before using.
AVERTISSEMENT: Pour réduire 
le risque de blessures, lire at-
tentivement les instructions 
d e   fo n c t i o n n e m e n t   ava n t 
l'utilisation.

1.  Read the owner's manual 

thoroughly. Failure to follow instructions could cause 
malfunction of the machine and result in death, serious 
bodily injury and/or property damage.
    2.  Know how to stop the machine and bleed pressure 

quickly. Be thoroughly familiar with the controls.

  3.  Stay alert — watch what you are doing.
  4. All installations must comply with local codes. 

Contact your electrician, plumber, utility company 
or the selling distributor for specific details. If your 
machine is rated 250 volts or less, single phase will 
be provided with a ground fault circuit interrupter 
(GFCI). If rated more than 250 volts, or more than 

single phase this product should only be connected 
to a power supply receptacle protected by a GFCI.

DANGER: Improper connection of the equipment-
grounding conductor can result in a risk of elec-
trocution. Check with a qualified electrician or 
service personnel if you are in doubt as to whether 
the outlet is properly grounded. Do not modify the 
plug provided with the product - if it will not fit the 
outlet, have a proper outlet installed by a qualified 
electrician. Do not use any type of adaptor with 
this product
DANGER:  Une mauvaise connexion du conducteur 
de terre de l'équipement peut entraîner un risque 
d'électrocution. Vérifier auprès d'un électricien 
qualifié ou du personnel d'entretien si vous avez 
des doutes quant à savoir si la sortie est correcte-
ment mise à la masse. Ne pas modifier la fiche 
fournie avec le produit - si elle n'entre pas dans la 
sortie, faire installer une sortie appropriée par un 
électricien qualifié. Ne jamais utiliser un adaptateur 
avec ce produit.

WARNING

KEEP WATER 

SPRAY AWAY FROM 

ELECTRICAL WIRING.

WARNING: Keep wand, hose, and 

water spray away from electric 
wiring or fatal electric shock may 
result.
DANGER: Garder la lance, le 
boyau et le jet d'eau à l'écart de 
tout câblage électrique ou des 
chocs électriques mortels pou 
raient survenir.

   5. To protect the operator  from  electrical shock, 

the machine must be electrically grounded.  
It is the responsibility of the owner to connect this 
machine to a UL grounded receptacle of proper 
voltage and amperage ratings. Do not spray water 
on or near electrical components. Do not touch 
machine with wet hands or while standing in water. 
Always disconnect power before servicing.

RISK OF EXPLOSION: 

DO NOT SPRAY  

FLAMMABLE LIQUIDS.

WARNING

WARNING: Flammable liquids 

can create fumes which can ig-
nite, causing property damage 
or severe injury.
AVERTISSEMENT: Des liq-
uides inflammables peuvent 
produire des vapeurs qui peu-
vent s'enflammer, causant ainsi 
des dommages à la propriété ou 
des blessures graves.

WARNING: Risk of explosion — Do not spray flam-
mable liquids.
AVERTISSEMENT: Risque d'incendie - Ne pas pul-
vériser de liquides inflammables.

  6. Do not allow acids, caustic or abrasive fluids to pass 

through the pump.

Summary of Contents for 1.106-160.0





































Reviews: