4.
Unscrew the inner M5 hexagon screw and
dissemble the lock case in single pieces.
7.
Turn latch 180° and mount it
again on the lock case.
8.
Put together lock case.
Change of the DIN direction
1.
Remove the stainless steel
–
cover rings and unscrew the
plastic lever guidance of the
stainless steel case.
2.
Remove both screws from the front
side of the lock case.
3.
Remove the stainless steel covers.
5.
Interchange the components: All single pieces on
the left hand side of the body of the lock will be
mounted on the right hand side and all single
pieces of the right hand side will be mounted on
the left hand side.
6.
Loose the latch.
Karcher GmbH
Deutschland
Tel. +49-7264-91640
Fax +49-7264-916440
[email protected]
www.karcher-design.de
