2
Group recommend you avoid prolonged exposure to excessive noise.
Customer's Record:
The serial number of this product is found on its bottom. You should note the serial number of
this unit in the space provided as a permanent record of your purchase to aid in identification
in the event of theft of loss.
Model Number: KN275
Serial Number :
___________________
CAUTION
Follow the advice below for safe operations.
ON PROTECTION AGAINST LASER ENERGY EXPOSURE
As the laser beam used in this compact disc player is harmful to the eyes, do not attempt
to disassemble the casing.
Stop operation immediately if any liquid or solid object should fall into the cabinet.
Do not touch the lens or poke at it. If you do, you may damage the lens and the player
may not operate properly.
Do not put anything in the safety slot. If you do, the laser diode will be “ON” when the CD
door is still open.
If the unit is not to be used for a long period of time, make sure that the power source
is disconnected from the unit. Unplug the AC cord from the wall outlet. Make it a
practice to remove the AC cord by grasping the main body and not by pulling the cord.
This unit employs a laser. The use of controls or adjustment or performance of procedures
other than those specified here may result in exposure to hazardous radiation.
ON PLACEMENT
Do not use the unit in places which are extremely hot
,
cold, dusty or humid.
Place the unit on a flat and even surface.
Do not restrict the air flow of the unit by placing it in a place with poor ventilation, by
covering it with a cloth or by placing it on a carpet.
ON CONDENSATION
When left in a heated room where it is warm and damp, water droplets or
condensation may form inside the unit.
When there is condensation inside the unit, the unit may not function normally.
Let it stand for 1 to 2 hours before turning the power on, or gradually heat the room up
and dry the unit before use.
Should any trouble occur, remove the power source and refer servicing to qualified personnel.
Summary of Contents for KN275
Page 6: ...5 CONTROL LOCATIONS...
