MCT245 RECEIVER
3
circuitry. The RF section runs on
the 3.3V supply.
The MCT245 uses Frequency
Hopping
Spread
Spectrum
that uses
16
channels
for
any hop mode
,
between
2.407GHZ and 2.470GHZ, with
1MHZ resolution.
The receivers are matched
to the transmitters to use the
same channels and sequence
as the transmitter’s signals.
The
MCT245
controls
outputs which
can
operate
relays, hydraulic valves, lights,
or other similar load devices,
according
to
customer
requirements.
Where Used
Typical applications for
the MCT245
are
to
controlling valves, relays and
lights on agricultural
equipment,
construction equipment, and
other similar equipment.