9
MCT245 RECEIVER
FCC Radiation Exposure Statement
The
product
can be installed or integrated in mobile or fix devices only.
This
product
cannot be installed in any portable device, for example, USB
dongle like transmitters is forbidden.
This
product
complies with FCC RF radiation exposure limits set forth for
an uncontrolled environment. This transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter.
This
product
must be installed and operated with a minimum distance of
20 cm between the radiator and user body.
If the FCC identification number is not visible when the
product
is
installed inside another device, then the outside of the device into which
the
product
is installed must also display a label referring to the enclosed
product
. This exterior label can use wording such as the following:
“Contains Transmitter
product
FCC ID: P4U-
MCT245
”
When the
product
is installed inside another device, the user manual of
this device must contain below warning statements;
1. This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including
interference that may cause undesired operation.
2. Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.
The devices must be installed and used in strict accordance with the
manufacturer's instructions as described in the user documentation that
comes with the product