Add Password
Modify users password(168):
Modify management password(88888888)
3
We provide two sets of initial factory password,one is user password(168) and
one is management password(88888888).Since the password Set button is inside
you must do it with the door open.
【
Set button is under the black protective cover,remove the protective
cover,you can see the set button inside
,when you finish the setting,restore
the protective cover to its original position,which can protect the set
button from being operated by mistake】
1.When the door is open and the display light is
off(Standby State),short press(About1 Second)
the set button on the inside of the back of the door.
2.The cursor is flashing.Enter3-8 digits new passwords.End with “#”key after entering the password.
(Pressing the # key means to tell the system that your password has been entered)
3.If the input is successful,the dispaly shows”IN” and a beep sounds.
eg:If you set the new password is “123456”,it means that you replaced the user password with 123456,
you can use 123456 to open the door,168 can not open the door.
1.When the door is open and the display light is off(Standby State).First press the “#”key to wake up
the display,then enter”00”,and press the set button on the inside of the back of the door.
2.The cursor is flashing.Enter3-8 digits new passwords.End with “#”key after entering the password.
(Pressing the # key means to tell the system that your password has been entered)
3.If the input is successful,the dispaly shows”IN” and a beep sounds.
Summary of Contents for BGX-D1-25MAZ
Page 1: ...Product Manual Applicable Model BGX D1 25MAZ...
Page 2: ......
