【
First Way to Open-External Battery Pack
】
In the factory state,you can use factory password “168” .After enter the correct
password,you must end with
“#”to let the System know that your password has
been entered. The management password is “88888888”
Step 1:
Insert 4-AA batteries into the external battery
pack in the correct direction(Because of
transportation,the battery is not included
in the accessorise)
Step 2:
Press the left or right end of the emergency keyhole
cover to expose the emergency keyhold.
(If the emergency keyhold cover is in the key box,this
step can be omitted )
Step 3:
Plug the battery plug into the external battery
pack hole.And press the“#”to wake up screen,
when the display shows the cursor states,enter
168 and press the “#”key to confirm.The display
shows “OPEN” and the door can be opend
automatically.
Step 3:
Step 4:
Unplug the battery pack,replace the battery into the
battery compartment above the back cover of the
box door.
When the battery is dead,or external battery pack cannot be found,or the password is forgotten,or
the fingerprint is not recognized,etc.You can use the emergency key to open the safe.
Once again,the emergency key and the external battery pack are very important,do not put them
int the safe box .
2
Summary of Contents for BGX-D1-25MAZ
Page 1: ...Product Manual Applicable Model BGX D1 25MAZ...
Page 2: ......
